1. Balance of Reciprocating Masses
* Benchtop model for investigating oscillating and rotating mass forces and moments on a reciprocating piston
machine with four cylinders:
* Simulation of 4, 2 and 1 cylinder machines
* Electronically commutated and speed-controlled DC motor with digital display and potentiometer
* Continuous adjustment of the crank offset
* Force and moment measurement using strain gauges, measuring amplifier with digital displays
2. Cam Analysis Apparatus
* Experimental unit for investigation of cam mechanisms
* 4 cams: tangent, hollow cam, 2 circular cams with different head radius
* Tappet with 2 different tracers: flat or roller tappet
* 3 interchangeable restoring springs
* Electric motor with speed control
3. Loading & Buckling of Struts
* Net dimensions and weight of main part:1350 mm long x 500 mm wide x 500 mm
high and 24 kg
* Net dimensions and weight of digital load meter:170 x 60 x 200 mm, 1.4 kg
* Net weight of additional beams and other items:1 kg
* Packed dimensions and weight of complete package:Approximately 0.5 m3,
40 kg
* Loading device:Screw with linear and thrust bearings
4. Photoelastic Experiments
* Representation of mechanical distribution of stress in photoelastic experiments
* 2 plane polarisation filters as polariser and analyser
* 2 quarter wave filters to generate circular polarised light
* All filters with 360° angle scale and marking of the main optical axis
* White light generated using a fluorescent tube and two incandescent lamps
5. Governor Apparatus
* Motors:
* Direct current, permanent magnet, 12V DC.
* Main shaft:
* Belt driven to 350 rev /min.
6. Gyroscope Apparatus
* Motors: DC commutator type motors, series wound and permanent magnet.
* Gyroscope speed up to 3750 rev/min
* Precession speed up to 60 rev/min.
* Demonstrates relationship between gyroscopic torque, rotor speed and rate of precession
* Portable and suitable for classroom demonstrations as well as use by students in the
laboratory
machine with four cylinders:
* Simulation of 4, 2 and 1 cylinder machines
* Electronically commutated and speed-controlled DC motor with digital display and potentiometer
* Continuous adjustment of the crank offset
* Force and moment measurement using strain gauges, measuring amplifier with digital displays
2. Cam Analysis Apparatus
* Experimental unit for investigation of cam mechanisms
* 4 cams: tangent, hollow cam, 2 circular cams with different head radius
* Tappet with 2 different tracers: flat or roller tappet
* 3 interchangeable restoring springs
* Electric motor with speed control
* 4 cams: tangent, hollow cam, 2 circular cams with different head radius
* Tappet with 2 different tracers: flat or roller tappet
* 3 interchangeable restoring springs
* Electric motor with speed control
3. Loading & Buckling of Struts
* Net dimensions and weight of main part:1350 mm long x 500 mm wide x 500 mm
high and 24 kg
* Net dimensions and weight of digital load meter:170 x 60 x 200 mm, 1.4 kg
* Net weight of additional beams and other items:1 kg
* Packed dimensions and weight of complete package:Approximately 0.5 m3,
40 kg
* Loading device:Screw with linear and thrust bearings
4. Photoelastic Experiments
* Representation of mechanical distribution of stress in photoelastic experiments
* 2 plane polarisation filters as polariser and analyser
* 2 quarter wave filters to generate circular polarised light
* All filters with 360° angle scale and marking of the main optical axis
* White light generated using a fluorescent tube and two incandescent lamps
5. Governor Apparatus
* Motors:
* Direct current, permanent magnet, 12V DC.
* Main shaft:
* Belt driven to 350 rev /min.
6. Gyroscope Apparatus
* Motors: DC commutator type motors, series wound and permanent magnet.
* Gyroscope speed up to 3750 rev/min
* Precession speed up to 60 rev/min.
* Demonstrates relationship between gyroscopic torque, rotor speed and rate of precession
* Portable and suitable for classroom demonstrations as well as use by students in the
laboratory
high and 24 kg
* Net dimensions and weight of digital load meter:170 x 60 x 200 mm, 1.4 kg
* Net weight of additional beams and other items:1 kg
* Packed dimensions and weight of complete package:Approximately 0.5 m3,
40 kg
* Loading device:Screw with linear and thrust bearings
4. Photoelastic Experiments
* Representation of mechanical distribution of stress in photoelastic experiments
* 2 plane polarisation filters as polariser and analyser
* 2 quarter wave filters to generate circular polarised light
* All filters with 360° angle scale and marking of the main optical axis
* White light generated using a fluorescent tube and two incandescent lamps
* 2 plane polarisation filters as polariser and analyser
* 2 quarter wave filters to generate circular polarised light
* All filters with 360° angle scale and marking of the main optical axis
* White light generated using a fluorescent tube and two incandescent lamps
5. Governor Apparatus
* Motors:
* Direct current, permanent magnet, 12V DC.
* Main shaft:
* Belt driven to 350 rev /min.
6. Gyroscope Apparatus
* Motors: DC commutator type motors, series wound and permanent magnet.
* Gyroscope speed up to 3750 rev/min
* Precession speed up to 60 rev/min.
* Demonstrates relationship between gyroscopic torque, rotor speed and rate of precession
* Portable and suitable for classroom demonstrations as well as use by students in the
laboratory
* Direct current, permanent magnet, 12V DC.
* Main shaft:
* Belt driven to 350 rev /min.
6. Gyroscope Apparatus
* Motors: DC commutator type motors, series wound and permanent magnet.
* Gyroscope speed up to 3750 rev/min
* Precession speed up to 60 rev/min.
* Demonstrates relationship between gyroscopic torque, rotor speed and rate of precession
* Portable and suitable for classroom demonstrations as well as use by students in the
laboratory
* Gyroscope speed up to 3750 rev/min
* Precession speed up to 60 rev/min.
* Demonstrates relationship between gyroscopic torque, rotor speed and rate of precession
* Portable and suitable for classroom demonstrations as well as use by students in the
laboratory