Process Metallurgy Research Laboratory

(Ferrous Division)

Journal Publications

 
  1. Soumya Sourav Sarangi, Avala Lavakumar, Prince Kumar, Prvan Kumar Katiyar, and Ranjit Kumar Ray, “Indentation size effect in steels with different carbon contents and microstructures.”, Materials Science and Technology, 2022. (https://doi.org/10.1080/02670836.2022.2113157)
    2.  
  2. Prvan Kumar Katiyar, Rita Maurya, and Prince K. Singh, “Highlighting the corrosion mechanisms of corroded plain carbon steels using the atomic force microscopy”, Internationa journal of sustainable buiding Technology & urban development, 2022. (https://doi.org/10.22712/susb.20220017)
    3.  
  3. Sheshang Singh Chandel, Abhinav Maurya, and Prince K. Singh, “Numerical investigation of quenching technique for steel alloy hardening process using twins liquid jets.”, Materials Today: Proceedings, 2022. (https://doi.org/10.1016/j.matpr.2022.01.368)
    4.  
  4. Prvan Kumar Katiyar, Rita Maurya, and Prince K. Singh, “Corrosion behaviour of plain carbon steels under different heat treatment conditionsin freely aerated 3.5% NaCl solution”, Internationa journal of sustainable buiding Technology & urban development, 2022. (https://doi.org/10.1007/s11665-021-05829-7)
    5.  
  5. Prvan Kumar Katiyar, Rita Maurya, and Prince K. Singh, “Failure Behavior of Cemented Tungsten Carbide Materials: A Case Study of Mining Drill Bits”, Journal of Materials Engineering and Performance, 2021. (https://doi.org/10.1007/s11665-021-05829-7)
    6.  
  6. Rohit Tiwari, Prince K Singh, Ankur Agnihotri and Dipak Mazumdar: " Shrouded transfer of molten steel from a ladle to tundish: thermal modelling and industrial scale measurements" ,  AIST Transactions, Vol.16, No.2, 2019, pp. 1-16. (https://doi.org/10.2355/isijinternational.ISIJINT-2018-127)
    7.  
  7. Prince K. Singh and Dipak Mazumdar, “Mathematical modelling of gas-liquid two flows in ladle shroud”, Metallurgical and Materials Transactions B, (2019), 50, 1091-1103. (https://doi.org/10.1007/s11663-019-01526)
    8.  
  8. Ankur Agnihotri, Prince K Singh, Rishikesh Mishra and Dipak Mazumdar: Steady state materials and enthalpy balance: applications to ferroalloy production and industrial scale validation , Trans Indian InstMet (2019), 72(2), 455-472. (https://doi.org/10.1007/s12666-018-1496-4).
    9.  
  9. D Mazumdar, Prince K Singh, Rohit K Tiwari: “Shrouded transfer of molten steel from ladle to tundish: current understanding, mathematical modelling and new insight”, ISIJ, (2018), 58(8), 1545–1547. (https://doi.org/10.1007/s12666-018-1496-4).
    10.  
  10. Prince K. Singh and Dipak Mazumdar, “A physical model study of two phase, gas -liquid flows in ladle shrouds and applications to industrial scale, ladle to tundish transfer operation” Metallurgical and Materials Transactions B, (2018), 49(4), 1945-1962. (https://doi.org/10.1007/s11663-018-1297-5).
    11.  
  11. Prince K. Singh , Ranjan S and Dipak Mazumdar,"Gas–Liquid Flows in Ladle Shroud and Their Impact on Tundish Process Performance and Steel Quality","Advanced High Strength Steel", (2018). (https://doi.org/10.1007/978-981-10-7892-7_17).
    12.  
  12. Prince Kumar Singh, Prvan Kumar Katiyar, Rita Maurya, Avala Lava Kumar, “Agglomeration behaviour of steel plants solid waste and its effect on sintering performance”, “Journal of Materials Research and Technology”, (2017), 6(3), 289-296. (https://doi.org/10.1016/j.jmrt.2016.11.005).
    13.  
  13. Prince Kumar Singh, Prvan Kumar Katiyar, Avala Lava Kumar, Dinesh Kumar Mishra Ajit Behera, “Agglomeration behavior of solid waste materials in steel plants”, Emerging Materials Research, (2016), 5(1), 171-176. (https://doi.org/10.1680/jemmr.15.00014).
    14.  
  14. Prvan Kumar Katiyar, Prince Kumar Singh, Rityuj Singh, A. lava Kumar, “Modes of failure of cemented tungsten carbide tool bits (WC/Co): A study of wear parts”, International Journal of Refractory Metals and Hard Materials, (2014), 54, 27–38. (https://doi.org/10.1016/j.ijrmhm.2015.06.018).
    15.    
  15. A. Lava Kumar, Ch.V.S Murthy, Prince Kr Singh, Bhargav Chaithanya and Shiva Kumar, “Property enrichment of aged nickel base superalloy Supercast 247A”, International Journal on Theoretical and Applied Research in Mechanical Engineering (IJTARME), (2013), 2(4), 115-120. .
    16.    

Feature Articles

 
  1. Dipak Mazumdar, Prince Kumar Singh, Rishikesh Mishra and Suvam Mukherjee, “Enhancing ladle shroud performance during industrial teeming practices to improve steel cleanliness”, Journal of Indian Refractory Makers Association (IRMA), (2018), Vol.3, 67-74.
    2.    

Book Chapter

 
  1. Prince K. Singh, Subham Ranjan and Dipak Mazumdar:  "Gas-liquid flows in ladle shroud and their impact on tundish process performance and steel quality", Published as book chapter in “Lecture notes in mechanical engineering”, Springer “Advances in High Strength Steel (AHSS 2017)” 149-158.
    2.      

Conferences Proceceding / Posters / Presentation

 
  1. Abhinav Maurya and Prince Kumar Singh: "Effect of Internal Gas Injection in Various Shroud Geometry and Influence on Tundish Hydrodynamic Performance, "4th International Conference on Science and Technology of ironmaking and steelmaking December 2022 IIT Bombay.
    2.  
  2. Sheshang Singh Chandel, Prince Kumar Singh and Navneet Singh Randhawa: "Effect of CaO content on crystallization behavior of EAF slag under different cooling environment, "4th International Conference on Science and Technology of ironmaking and steelmaking December 2022 IIT Bombay.
    3.  
  3. Sheshang Singh Chandel, Prince Kumar Singh and Navneet Singh Randhawa: "Studies on Physicochemical and Toxicity Characterization of Electric Arc Furnace Slag, "Valorization of Fly Ash & Steel Slag: Challenges, Innovations & Future Trend: September 2022., Jamshedpur.
    4.  
  4. Abhinav Maurya and Prince Kumar Singh: "Internal Gas Injection in Shroud and Influence on Tundish Hyrodynamic Performance,"8th International Congress on the Science and Technology of Steelmaking August 2022, Canada.
    5.  
  5. Sheshang Singh Chandel, Prem Chandra Sinha and Prince Kumar Singh: "Behavior of Electric Arc Furnace Slag under Different Cooling Conditions and Its Environmental Impact,"8th International Congress on the Science and Technology of Steelmaking August 2022, Canada.
    6.  
  6. Abhinav Maurya, Ankur Agnihotri and Prince Kumar Singh: "Ladle shroud performance enhancement: a process modelling investigation", 75 th Annual Technical Meeting (ATM), 59 th National Metallurgists day (NMD) November 2021.
    7.  
  7. Sheshang Singh Chandel, Ankur Agnihotri, Prem Kumar Sinha, Prince Kumar Singh: "Ladle shroud performance enhancement: a process modelling investigation", 75 th Annual Technical Meeting (ATM), 59 th National Metallurgists day (NMD) November 2021.
    8.  
  8. Suvam Mukherjee, Prince K Singh and Dipak Mazumdar: "Ladle shroud performance enhancement: a process modelling investigation", Proceeding, IREFCON-2020 (Kolkata), in press.
    9.  
  9. A. Agnihotri, Prince K Singh, D. Singh and M. Gupta, Foamy slag practice to enhance the energy efficiency of electric arc furnace: an industrial scale validation: Materials Today Proceeding in press.
    10.  
  10. Dipak Mazumdar, Prince Kumar Singh, Rishikesh Mishra and Krashnavtar: "Simulation of steelmaking processes: an assessment of reduced and full scale water modelling, numerical simulation vis a vis plant scale measurements" Proceeding., STEELSIM2019 (AIST), Toronto, Canada, Aug. 13-15 th , 2019, pp.769-779.
    11.  
  11. Rohit K Tiwari, Prince K Singh, Dipak Mazumdar : Molten steel – refractory interface: Thermal resistance estimation and industrial scale measurements, NMD ATM 2018, 14th – 16th November 2018, Kolkata, India.
    12.  
  12. Prince K Singh, Rohit K Tiwari, Dipak Mazumdar, Abhishek Dutta : Modeling of two phase, gas- liquid flows in ladle shroud “ 7th International congress on science and technology of steelmaking”, Published in proceeding of ICS2018 (Presented on 13 th June 2018 at Venice, Italy).
    13.  
  13. Prince K. Singh and Dipak Mazumdar: “Macroscopic modeling of argon-steel flows inside a ladle shroud”, Published in proceeding of STIS17, IIT Kanpur, India (Presented on 13 th December 2017 at IIT Kanpur).
    14.  
  14. Arun Kumar, A. Lavakumar, Prince K. Singh and S. K. Badjena “A review on Metalic Foams” [Poster presented in national conference on “Behind the teachers desk-2015” (April 9 th -10 th ) in CSIR –NML Jamshedpur.
    15.  
  15. Prince Kumar Singh, P.K. Katiyar, A. Lava Kumar and S. Pramanik, “Recycling of blast furnace flue dust and sludge used as pellets in sintering” (Presented at NMD ATM 2013 at IIT BHU).
    16.  
  16. A.Lavakumar, P.K.Singh, P.K.Katiyar, T.Trinath and A.K.Jaiswal, “Archaeometallurgical studies of ancient sword” (NMD ATM 2014, 12 th – 15 th November 2014, College of Engineering, Pune).
    17.  
  17. A Lavakumar, N Bhargav Chaitanya, B Shiva Kumar, Virinchi Sainath and Prince Kr Singh “Study of Tensile Fracture Mechanisms of a Ni-base superalloySupercast 247A” Published in proceedings, Procedia Materials Science under Elsevier Ltd, , Vol.5 pp1090-1096.
    18.  
  18. A. Lava Kumar, Prince Kr Singh, Sanjay Srivastava, Suraj Kori and Ajay Kumar “Gamma prime coursing behavior of nickel superalloy Supercast 247A after prolonged thermal exposures” 2 nd National conference on Recent developments in mechanical engineering, (RDME’2013) April 26-27, 2013 pune, Published in Journal: IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) ISSN (e): 2278-1684, ISSN (p): 2320–334X, PP: 37-42.
    19.  
  19. A.Lava Kumar, Prince Kr Singh, Rabindra Kr Rai and Sanjay Srivastava “Measurment of thermo physical properties of nickel base super alloys”, International conference on metallurgical manufacturing and mechanical engineering (ICMMME’13), April 30th 2013.
    20.  
  20. A Lava Kumar, Prince Kumar Singh, M. Sai Krishna Rao, Ch.V.S Murthy, N. Eswara Prasad “Boronising behaviour of Nickel and Iron Nickel base alloys” (Poster presented in 10th International Symposium on surface protective coatings (SSPC India 2013) on Feb 15 th & 16 th , 2013), Mumbai (India).
    21.