Publication of Department of Mechanical, Materials & Energy Engineering annual year 2013-14

School of Mechanical,   Materials & Energy Engineering

Book chapters:

1. A.O. Jayal, "Sustainability Issues in Micro manufacturing", in "Introduction to Micromachining", Ed.: V. K. Jain, Narosa Publishers, 2014.

Journals:

1. R. S. Joshi, H. Singh, and I. Singh, "Modulation Assisted Drilling of Glass Fiber Reinforced Plastics", Mater. Manufact. Processes, vol. 29, no. 3, pp. 370-378, 2014 .

2. R. S. Joshi, and H. Singh, "An Investigation on Flank Wear Mechanism of Tungsten Carbide Drills during Conventional and Modulation Assisted Drilling", Machining Sci. Technol., vol. 18,no.1,pp.  99-119,  2014.

3. H.S. Arora, H. S. Grewal, H. Singh, B.K. Dhindaw,D.S. McPhail, S. Barbara, R. Chater, and S. Mukherjee, "Microstructure-Property Relationship for Friction Stir Processed Magnesium Alloy", Adv. Eng. Mater., vol. 16, no.l, pp.94-102,2014.

4. A. Bhowmik, R. Repaka, S.C. Mishra and K. Mitra, ''Analysis of Radiative Signals from Normal and Malignant Human Skins Subjected to a Short­ Pulse Laser", Int. J. Heat Mass Tran., vol. 68, pp. 278-294,  2014.

5. A. Mallick and R. Das, ''Application of Simplex Search Method for Predicting Unknown Parameters in an Annular Fin subjected  to Thermal Stresses", J.Therm. Stresses, vol. 37, no. 2, pp. 236-251, 2014 .

6. P. Jindal, M. Goyal and N. Kumar, "Mechanical Characterization of Multiwalled Carbon Nanotubes-Polycarbonate Composites", Materials and Design, vol. 54, pp. 864-868, 2014.

7. 0. Ruzimuradov, S. Nurmanov, M. Hojamberdiev,R.M. Prasad, A. Gurlo, J. Broetz, K. Nakanishi, andR. Riedel, "Preparation and Characterization of Macroporous TiO2-SrTiO3 Heterostructured Monolithic Photocatalyst," Mater. Lett., vol. 116, pp. 353-355, 2014 .

8. R. Das, "Three-Parameter Estimation Study in a Radial Fin Geometry using Fdm based Simplex Method", Heat Transfer En g., vol. 35, no.14-15, pp.1309-1319,  2014.

9. A. Mallick, and R. Das, ''Application of Simplex Search Method for Predicting Unknown Parameters in an Annular Fin Subjected To Thermal Stresses", J.Therm. Stresses, vol. 37, no. 2, pp. 236-251, 2014.

10. T. K. Gogoi, and R. Das, ''A Combined Cycle Plant with Air and Fuel  Recuperator  for  Captive Power Application, Part 2: Inverse Analysis and Parameter Estimation", Ene rg. Co nve rs . Manage.,vol.  79,pp.  778-789.2014.

11. M.K. Surappa, "India's Ranking in Materials Research", Current Science, vol.105, no. 2, pp. 147-149,2014.

12. H.S. Arora, H. S. Grewal, H. Singh and S. Mukherjee, "Zirconium Based Bulk  Metallic Glass - Better Resistance to Slurry Erosion Compared to Hydroturbine Steel", Wear, Vol. 307, pp. 28-34, 2013.

13. H. S. Arora, H. Singh, and B.K. Dhindaw, "Wear Behaviour of a Mg Alloy Subjected to Friction Stir Processing", Wear, vol. 303, no. 1-2, pp. 65- 77, 2013.

14. H. S. Grewal, H. Singh and A. Agrawal, "Microstructural and Mechanical Characterization of Nickel-Alumina Thermal Sprayed Coatings", Surf. Coat. Technol., vol. 216, pp. 78-92, 2013.

15. M. Kumar, H. Singh, and N. Singh, "Synthesis and Deposition of Ni-20Cr Powder using Cold Spraying", Surf. Eng., vol. 29, no. 6, pp. 419-426, 2013.

16. R. Gulati, A. Reddy, V. Khullar, V. Bhalla, H. Tyagi, Y. Zhao, E. Law, and R. A. Taylor, "Enhancing the Efficiency of Absorption Refrigeration Cycle by Seeding Nanoparticles Directly in the Working Fluid", Int. J. En viron. Stud ., vol. 70, no. 5, pp. 808-823, 2013.

17. R. K. Singla, and R. Das, ''Application of Adomian Decomposition Method and Inverse  Solution for a Fin with Variable Thermal Conductivity and Heat Generation", Int. J. Heat Mass Tran., vol. 66, pp. 496-506, 2013.

18. A. Bhowmik, R.K. Singla, P.K. Roy, D.K. Prasad, R. Das, and R. Repaka, "Predicting Geometry of Rectangular and Hyperbolic Fin Profiles with Temperature-Dependent  Thermal  Properties using Decomposition  and  Evolutionary Methods", En erg. Convers. Manage., vol. 74, pp. 535-547,  2013.

19. H. S. Grewal, A. Agrawal and H. Singh, "Slurry Erosion Performance of Ni-Al2O3 based Composite Coatings", Tribology Intern., vol. 66, pp.  296-306, 2013.

20. P. Sarkar, and A. Chakrabarti, ''A Support for Protocol Analysis for Design Research", Design Issues, vol. 29, no. 4, pp. 70-81, 2013.

21. P. Jindal, M. Goyal, and N. Kumar, "Modeling Composites of Multi-Walled  Carbon  Nanotubes in Polycarbonate;' Int. J. Comput. Methods En g. Sci. Mech., vol.14, pp. 542-551, 2013 .

22.  Saini, and N. Kumar, "Torsional Deformation Behavior of Cracked Gold Nano-wires", Acta Mechanica, vol. 225, no. 3, pp. 687-700, 2013.

Conference proceedings:

1.M. Kumar, H. Singh, and N. Singh, "Study of High Temperature Oxidation Behavior of Cold Sprayed Novel Ni-20Cr Coating on T22 Boiler Steel" in proc. Int. Co nf. Corrosion, San Antonio, 2014.

2. M. Kumar, H. Singh, and N. Singh, "Improving High Temperature Oxidation Resistance of a Boiler Steel by a Novel Ni-20Cr Nanostructured Coating" in . proc. Int. Corrosion Prevention Symp. for Research Scholars, Bombay, 2014.

3. A. K. Tiwari, and J. Prasad, "Bone's Adaptation to Mechanical Loading: Fluid Flow Versus Shear Strain," in proc. 2nd Int. Conf. Medical Materials, Devices & Regenerative Medicine, Kathmandu, 2014.

4. Gun Sprayed Cr3C2-25NiCr and Cr203 Coatings on CF8M Steel", in proc. Int. Co nf. Research and Innovations in Mechanical Engineering, Ludhiana, 2013.

5. T. Mittal, S. Saroha, V. Bhalla, V. Khullar, H. Tyagi,R. A. Taylor, and T.P. Otanicar, "Numerical Study of Solar Photovoltaic/Thermal (PV/T) Hybrid Collector  Using Nanofluids", in proc. 4th Micro/Nanoscale Heat & Mass Transfer Int. Conf., Hong Kong, 201 3.

6. K. Vijayaraghavan, H. Tyagi, S. Randhawa, and M. Singh, "Wind Solar Hybrid Power System Modelling and Analysis", in proc. 7th Int. Conf. Energy Sustainability and 11th Fuel Cell Science, Engineering and Technology Conf., Minneapolis, 2013.

7. K.  Grover,   J. Thakuria,    N. S. Wasudeo,   N.R Gopinathan,    and     J.  Prasad,   "A   Biomimetic Implant   for   Osteogenesis    Imperfecta",   in proc.2nd Inter . Co nf. Medical Materials, Devices & Regenerative Medicine, Kathmandu, 201 4.

8. R. K. Singla, R. Das and P. K. Roy, ''Application of Adomian Decomposition Method for a Conductive, Convective and Radiative Moving Fin", in proc. 22nd Nat . and 11th ISHMT-ASME Heat& Mass Transfer Co nf., Kharagpur, 201 3.

9. S Kumar,  D.  Kumar, A.  K. Tiwari  and J. Prasad, "Investigating Bone's Adaptation to Mechanical Environment   Using  Neural   Networks,"  in  proc. 2nd Int. Conf. Medical Materials, Devices & Regenerative Medicine, Kathmandu, 2014.

10.M.  Kumar,  H. Singh,  and   N. Singh, "Study of Oxidation Behavior of   HVOF   Sprayed Nanostructured   Ni-20Cr   Coating  on  SA 516 Boiler Steel", in Proc. Int. Conf. Advancements and Futuristic Trends in Mechanical and Materials Engineering, Jalandhar, 201 4.

11. M.  Kumar,   H.  Singh,   and   N. Singh,  "High Temperature  Oxidation Behavior of a  Novel Ni-20Cr Alloy Powder Coating on T22 Steel", in Proc. Int. Conf. Thermal Spray Coatings, Busan, 2013.

12. G. Kaushal, H. Singh, and S. Prakash, "Comparative  analysis  of  D-gun sprayed  Ni-20Cr and WC-Co coatings in actual boiler environment", in pro c.  Int. Thermal Spray Conference and Exposition, Busan, 2013 .

13. M. Ka ur, H. Singh, and S. Prakash, "Role of Silicon in   Reducing   High  Temperature   Oxidation of High   Velocity   Oxy-fuel Sprayed  Cr3C2-NiCr Coating",   in   proc.  Corrosion   Conference and Expo, New Delhi, 2013.

14. S. Bhandari,  H.K. Kansai, H. Singh, S. Kumar and M. Kaur, "Slurry  Erosion  Testing of DetonationR.K. Singla, R. Das, A. Bhowmik, and R. Repaka, "Inverse Heat Transfer Analysis of Porous Extended Surface using Simplex Search Method", in proc. ASME-2013: Gas  Turbine India Conf., Bangalore, 2013.

15. A. Bhowmik, R. Repaka, R. Mulaveesala and S.C. Mishra, "Thermal Characterization of Varying Subcutaneous Fat Thickness using Thermal Wave Imaging Technique", in proc. 22nd Nat. and 11th ISHMT-ASME Heat and Mass Transfer Co nf., Kharagpur, 20 13.

16. R. Repaka and V.V. Satyamurty, "Effect of Viscous Dissipation on Wall Heat Transfer and Energy Gain by the Fluid : Parallel Plate Channel Subjected to Unequal Wall Temperatures", in proc. 22nd Nat. and 11th ISHMT-ASME  Heat and  Mass TransferConf., Kharagpur, 2013.

17. A. Bhowmik, R. Repaka, S.C. Mishra and K. Mitra, "Thermal Assessment of Ablation Limit of Subsurface Tumor During Focused Ultrasound and Laser Heating", in proc. 22nd Nat. and 11th ISHMT-ASME Heat and Mass Transfer Conf., Kharagpur, 2013.

18. A. Bhowmik, R. Repaka and S.C. Mishra, "Thermal Imaging and Screening of Subsurface Cancer during Thermal Recovery after Cold Stress", in proc. 10th Int. Conf. Flow Dynamics, Sendai, 2013.

19. A.  Bhowmik,  R.  Repaka,  S.C.  Mishra and  R. Mulaveesala,   "Detection   of   Subsurface   Skin Lesion   Using   Frequency   Modulated   Thermal Wave  Imaging:  A  Numerical  Study",  in  proc. ASME   2013   Int.   Mechanical   Engineering Congress and Expo., San Diego, 2013.

20. R.  Repaka,  and  V.V.  Satyamurty, "Effect of  Viscous Dissipation on Forced Convection Heat Transfer in Parallel Plate Channels  with Asymmetric  Boundary   Conditions",   in   proc. ASME  2013  Int.  Mechanical   Engineering Congress and Expo., San Diego, 2013.

21. E. Singla, S. Singh, S. Gupta, "Novel Modular Strategy for the Fabrication of Robotic Manipulators Based Upon Task-Based Designs", in proc. 1st Int. & 16th Nat. Conf. Machines and Mechanisms,  Roorkee, 2013.

22.   E.  Singla,   and   B.   Dasgupta, "Maneuvering  Redundant  Manipulators in   Cluttered Environments", in  proc. IEEE 6th Robotics and Mechatronics Conf., Durban, 2013.

23.H. S. Grewal, H. Singh, and A. Agrawal, "Understanding Liquid Impingement Erosion Behaviour of Nickel-Alumina Based Thermal Spray Coatings", in proc. 19th Wear of Materials Conf., Portland, 2013.

24. H. S. Grewal, H. Singh, A. Agrawal, and S. Mukherjee, "Slurry Erosion of Thermal Spray Coatings : Effect of Sand Concentration", in proc. Malaysian Int. Tribology Conf., Kota Kinabalu, 2013.

25. S. B. Dhage, G. S. Goindi, A. D. Jayal, and P. Sarkar, "Influence of Cutting Tool Flank Surface Texture in   Mechanical   Micromachining  of AISI 1045 Steel," in proc. Nat. Conf. Manufacturing: Vision for Future, Guwahati, 2013.